Guides · Contract

Will I be able to order the same furniture in three years?

An armchair to replace two years after opening, a damaged bedside table, a room to put right. Here is what makes a bespoke piece of furniture reproducible, what changes by itself with time, what replacing a cover does to the certificate, and what stock is worth buying with the supply.

In brief. A bespoke piece of furniture is not re-ordered the way a catalogue item is: it comes out of one particular batch of fabric, leather, wood and lacquer, and that batch runs out. Getting the same piece years later depends on three things settled on the day of the order and not on the day something breaks: what stays written down, which samples are kept, and what stock was bought with the supply.

Why a bespoke piece is not a catalogue item

The question always arrives at the same moment: two years after opening an armchair in the lobby has to go, or a bedside table has been damaged, and the hotel asks for «one the same, please». The honest answer is that it depends — on things almost nobody fixed at the right time.

Contract furniture does not sit in a warehouse: it is made for that supply, with materials bought for that supply. The drawing can be repeated exactly, because it is a drawing; so can the workmanship, because it is ours. The materials cannot: the fabric is an item in a range the mill may have withdrawn, the leather a batch of hides tanned together, the veneer from one log, the lacquer from a formula that is mixed. Each of those four has a commercial life that depends neither on the hotel nor on whoever made the piece.

Which is why the best answer is not «yes, of course» but a question back: do you need an identical piece or a compatible one? They are two different jobs, with different costs and different lead times.

The three things that make a piece reproducible

In practice a piece is remade exactly when all three exist.

  • The technical documentation, with codes and not names. «Grey armchair» is not information; «this item, this colour, from this supplier» is. It holds for the fabric, the panel, the paint and the hardware. The useful document is the piece's bill of materials, not the line on the quotation: which papers a hotel supply's file has to contain is the subject of the guide on furniture documents.
  • Physical samples, kept by both parties. An approved fabric swatch, a lacquer panel, an offcut of leather: they are the only reference that holds once the code no longer does, because the item has changed. They are also the proof that settles arguments about defects, as the guide on fabric differing from the approved sample shows.
  • The stock bought with the supply. It is the only one of the three that costs money, and also the only one that always works: fabric set aside then is that fabric, in that dye lot, for good. Everything else is a probability.

What changes by itself, with time

The causes are few and they repeat on every project.

  • The item is discontinued. Fabric ranges are renewed, and a withdrawn item does not come back. Sometimes a similar fabric remains in the same collection: similar, not the same.
  • The dye lot. The same item dyed at two different times can differ in tone by an amount that does not show on a curtain and does show on two armchairs side by side. It is why fabric stock is asked for from the same roll, and not «of the same fabric».
  • Leather. It is a natural material tanned in batches: grain, tone and hand vary between one batch and the next more than fabric does. What to ask for is in the guide on leather for bespoke sofas.
  • Wood and lacquer. A veneer comes from a log, and two leaves taken from different logs have a different figure even in the same species with the same finish; a colour is repeated by formula, but the result also depends on the substrate and on the cycle. On a continuous run of fronts the difference reads at once.

And the fire certificate?

This is the part that weighs most in a hotel, because it is not about appearance. On an upholstered piece the Italian type approval covers the piece in its precise combination of padding, interliner and cover: recovering it with a different fabric means having a different piece, and the certificate of the original no longer covers it. The full reasoning, with the cases in which the class does remain valid, is in the guide on reupholstery and the fire certificate.

The practical consequence: replacing a cover is not routine maintenance but work that touches a document, and it is planned with whoever made the piece — the only party that can declare what was inside it. For the same reason, changing a fabric once production has started is never free: that is the guide on changing fabric mid-production.

What stock to ask for, and of what

Stock is decided category by category, looking at what breaks and what shows. In order of usefulness:

  • metres of fabric and leather from the same batch, held by the hotel or by the supplier on its behalf: they cover the recovering of the most exposed pieces, the seating;
  • whole pieces of the kind that get damaged first: the desk chair, the small armchair, the occasional table — a few pieces, not a whole room;
  • loose parts: handles, feet, hinges, drawer runners, cushions. These break with normal use and keep a room out of service for weeks if they have to be re-ordered as bespoke parts.

How much stock is needed depends on the rooms, on the kind of property and on the turnover, and is not a number anyone can give in general. It is, though, an item to write into the specification, not to raise once the supply is finished: how it is written is in the guide on the furniture specification.

Phased renewal: identical or compatible

Many properties renew floor by floor, a piece at a time, over several years. Chasing the identical is then a road that closes by itself: sooner or later an item is discontinued and the plan stops.

The approach that holds is to set the supply up so that pieces are compatible rather than twins: a range of materials in which two different batches sit well together, and rooms that never compare two pieces of the same kind directly. It is decided in the mock-up room, where these things are seen instead of imagined: that is the guide on the mock-up room.

The lines to put in the order

Five items that cost nothing while negotiating:

  • the bill of materials for each piece, with suppliers' codes and not trade names, handed over with the supply;
  • how long the supplier keeps shop drawings, bills of materials and samples, and what is handed to the client so that the client keeps them too;
  • which metres of fabric and leather from the same batch remain, where they are and whose they are;
  • how the «item discontinued» case is handled: who proposes the alternative, who approves it, and with what consequence for the upholstered piece's certificate;
  • what the warranty covers and what counts instead as a new supply, a distinction that also shifts with the form of contract: that is the guide on warranty under a works or a supply contract.

How we work

We work wood, marble, iron and upholstery in house, and the drawings and bills of materials of every project stay with us: which is why, on a piece we made, we can say in advance whether it can be remade identical, remade compatible, or has to be reconsidered, and what that choice does to the documents. On a hotel project the most valuable thing is time: goods made to standard, certified and delivered on schedule mean a fast opening, and a client who starts invoicing.

The work we do is in the collections, project supply in the contract section, and the contacts lead to the people who follow the job.

Frequently asked questions

I need an armchair the same as the ten in the lobby: can it be done?

If the fabric or the leather still exists and the bill of materials was kept, yes. If the item has been discontinued it is remade compatible, and on an upholstered piece replacing the cover also touches the certificate: it has to be treated as technical work, not a repair.

How much stock is worth buying with the supply?

There is no quantity that holds for everyone, because it depends on the rooms and the turnover. The useful rule is that stock pays where damage is likely and the difference shows: metres of fabric from the same batch, a few seats, and the loose parts that break with use.

Why are two pieces in the same fabric not identical?

Because the same item dyed at two different times can be slightly different in tone, and on two pieces side by side it shows: which is why stock is asked for from the same roll.

Talk to us The contract division All guides

This page describes good practice in managing a furniture supply and does not replace a contract. It quotes no prices, no stock quantities, no lead times and no company cases, and it cites no technical standards: the conditions that apply are those agreed between the parties and, for fire documents, those of the approved design.